Boxing Hand Wraps Revgear Pinnacle 4,5m

Please select an option
Variant does not exist
Green Red Grey Pink White Brown
8 EUR
RevGear Key features
– 4.5 m length – the universal choice
– Softer and thinner than standard
– Durable stretch elastic
– Full-width Ultra-Lock™ closure
– "This Side Down" thumb loop
More info
Product code: P01025 Shipping and Payment

Revgear Pinnacle Hand Wraps 4.5 m – Soft Boxing Wraps for Everyday Training

The Revgear Pinnacle hand wraps are built for boxing, kickboxing, Muay Thai and MMA – anywhere your hands need to be secured fast and reliably. Compared to the standard Revgear range they're softer and slightly thinner, so no bulk builds up inside the glove and your hand stays compact. The 4.5 m length is the universal standard: enough to fully wrap the wrist, knuckles and between the fingers, without the leftover material you get with 5 m versions.

Stretch fabric that holds all session

The wrap is made from durable stretch elastic that conforms to the shape of your hand and evens out the tension as you wrap. It doesn't loosen after a few rounds on the bag, so you won't be pulling your gloves off mid-session to re-wrap.

Ultra-Lock™ closure and thumb loop

The Ultra-Lock™ hook-and-loop closure is sewn in across the full width of the wrap – the end won't lift during training or work loose inside the glove. The thumb loop is marked "This Side Down" so you know which side to start with and can wrap correctly without help.

Machine washable, six colours

These wraps are machine washable and reusable – no lingering smell and no bacteria settling into the fabric. Choose from six colours: white, grey, green, red, pink and gold, matched to the gloves in the Pinnacle range. Sold in pairs.

Technical specifications

Length: 4.5 m (180")
Width: 5 cm (2")
Material: Durable stretch elastic
Closure: Sewn-in Ultra-Lock™ hook and loop, full width
Thumb loop: Yes, with "This Side Down" marking
Care: Machine washable, reusable
Contents: One pair (2 pcs)
Built for: Boxing, kickboxing, Muay Thai, MMA

Which wrap length to choose

Length Who it's for
2.5 m Kids, small hands, quick wrapping
3.5 m Women and smaller hands, basic wrap
4.5 m The universal choice – most boxers, full knuckle and between-finger wrap
5 m and up Large hands, heavier weight classes, maximum layering

Frequently asked questions

Is 4.5 m long enough?

Yes – 4.5 m is the most common length and works for the vast majority of boxers. It covers the wrist, palm, knuckles and between the fingers with room to spare. If you have particularly large hands or like to build up extra padding over the knuckles, go for the 5 m version.

How do these differ from standard Revgear wraps?

The Pinnacle range is softer and slightly thinner. That means it layers better inside the glove without creating pressure points – particularly useful if your gloves fit closely or if thick wraps eat up too much room. The standard model is firmer and gives a slightly tighter lock.

How should I wash them?

Roll the wraps up and fasten the hook and loop before washing so they don't tangle with the rest of your laundry – a mesh laundry bag is ideal. Wash at 30 °C without fabric softener and dry them laid out flat. Keep them out of the tumble dryer, as the elastic fibres will lose their stretch.

How do I know which side to start with?

"This Side Down" is printed on the wrap next to the thumb loop. That side faces your hand – slip the loop over your thumb, run the wrap across the back of your hand and start at the wrist. The marking means you can't get it wrong, even on your first go.

How many wraps do I get?

One pair, so two wraps – one for each hand. If you train several times a week, it's worth having two pairs and rotating them so the other set has time to dry out.

Parameters
Material Mixed fabric
Color Green Red Grey Black Pink White Brown
Sport Box, MMA, Kickbox, Muay Thai, Grappling
Target For men, For women

Protective gear: correct use and care

Protective gear only works when it fits properly and stays clean. A badly moulded mouthguard doesn't protect the way it should, and damp shin guards break down from the inside. The few minutes after training decide how long your gear lasts.

How to mould a SISU mouthguard
The most important difference: SISU is not moulded in boiling water. Boiling water damages the material. Use water that is hot to the touch but not boiling.
What you'll need
  • A bowl of hot, not boiling, water
  • A fork or spoon to lift it out
  • A mirror
Step by step
  • Wash your hands and rinse the mouthguard
  • Before you soak it, dry-fit it to see how the bite surface sits on your teeth
  • Place the mouthguard in the hot water and let it soften
  • Fit it onto your teeth and mould it around every tooth, molars included, not just the front ones
  • Spread the material so it covers the full surface of your teeth
  • Close your lips and sip air gently, the suction finishes the shaping
What to avoid while moulding
  • Boiling water
  • Leaving the back teeth uncovered
  • Stretching the material too far, which creates oversized openings
  • Sucking in air too hard, which leaves the fit uncomfortably tight
  • Trimming it with scissors, which strips the mouthguard of its protective properties
SISU can be remoulded up to twenty times. Just put it back in hot water, it returns to its original flat shape on its own and you can start again. That helps when teeth shift and during treatment with braces.
For the warranty to apply, the mouthguard must be moulded along the entire dental arch, not just the front teeth. With braces, use the larger size and check the moulding with your orthodontist.
Standard boil & bite mouthguards

Unlike SISU, standard mouthguards are moulded in boiling water. Always follow the instructions of the specific manufacturer, the procedures differ between brands.

  • Soak it for as long as the manufacturer specifies, the material has to soften
  • Cool it briefly in lukewarm water so you don't burn yourself
  • Fit it on your upper teeth, bite down firmly and press your tongue against the roof of your mouth
  • Press the material against your gums from the outside with your fingers
  • Take it out and cool it in cold water, which sets the shape
If the fit isn't right, most mouthguards can be remoulded. The number of attempts is limited though, the material loses a little with each round.
How to clean and store a mouthguard
After every session
  • Rinse it with cold water as soon as you take it out of your mouth
  • Clean it with a soft brush and soapy water or a mouthguard cleaner
  • Let it dry completely before you put it away
  • Store it in a vented case, not loose in your bag
What to avoid
  • Hot water when cleaning, the mouthguard would lose its shape
  • Abrasive toothpaste
  • Dishwasher, steriliser, microwave
  • Leaving it in the car or in the sun, heat will warp it
  • Chewing on it outside training
When to replace it: cracks, torn spots or bite-through damage · it no longer holds onto your teeth · warping that remoulding won't fix · odour that stays after cleaning.
Shin guards
Getting the fit right
  • The guard has to cover the shin along its full length and must not rotate to the side
  • The instep pad belongs on top of the instep, not under it
  • Fasten the straps firmly, but not so tight that they restrict circulation
Care after training
  • Take them out of your bag and let them dry at room temperature
  • Wipe the surface with a damp cloth, treat the inside with a gear spray
  • Treat leather models with leather conditioner every two months
  • Pull lint out of the velcro regularly, otherwise it stops holding
Guards with a hard shell or foam padding don't belong in the washing machine or the dryer. Fabric guards without a rigid insert are washed according to the label, at a low temperature and without fabric softener.
When to replace them: cracks in the foam or shell · the padding has flattened and you feel the impact · stretched straps · the instep pad twists out of place.
Headgear
Getting the fit right
  • Headgear must not shift when you move your head or narrow your field of vision
  • The cheek pads sit on your cheekbones, not in your line of sight
  • Tighten the chin strap so the headgear stays put on its own
Care after training
  • Wipe out the inside and let it dry outside your bag
  • Wipe the surface with a damp cloth, sweat contains salt and salt damages the material
  • Treat leather headgear with conditioner every two months
  • Don't dry it on a radiator or in the sun, it damages both the material and the print
When to replace it: the foam has hardened or cracked · the chin strap or closure no longer holds · the headgear slips during sparring.
Body protectors and groin guards
Groin guards
  • The cup has to sit firmly and must not shift while you move
  • Always take out a removable cup before washing
  • Wash the fabric part after every session, at a low temperature and without fabric softener
  • Wipe the cup with a damp cloth and let it dry
Body, chest and forearm protectors
  • Wipe them with a damp cloth after training and let them dry outside your bag
  • Never put foam or shell components in the washing machine
  • Check the straps regularly, on chest protectors they hold the whole thing in place
When to replace: a cracked cup · flattened or crumbling foam · stretched elastic and straps that no longer hold.
Protective gear for kids
  • Check the size every season, kids grow and gear that doesn't fit doesn't protect
  • Always mould a child's mouthguard with an adult present
  • With braces, check the procedure with an orthodontist
  • Set up a routine after training, kids won't remember the care part on their own
  • Put a moisture absorber in the bag, kids' gear stays in there the longest
What to avoid with all protective gear
  • Washing machine and dryer for anything with foam, gel or a hard shell
  • Drying on a radiator, in the sun or with a hairdryer
  • Leaving gear in a closed bag overnight
  • Storing it somewhere damp, in a garage or a basement
  • Harsh cleaners and alcohol on leather and PU surfaces
  • Sharing protective gear, and never sharing a mouthguard
How long protective gear lasts depends on how often and how hard you train, the type of impact and the material. Poor care shortens it considerably. Don't repair damaged gear, it no longer does its job.
Manufacturer Revgear Sports
Address 14768 Pipeline Ave, Chino, CA 91710, USA
Email info@revgear.com
Manufacturer's representative in the EU ROK corp s.r.o.
Address of representative in the EU Lipůvka 350, Lipůvka, Czechia
EU representative email admin@rokcorp.eu
%s ...
%s
%image %title %code %s
%s